If you are experiencing connection issues with your RAW IP setup, follow these steps to diagnose and resolve the problem.
Check Your RAW IP and Port Settings
Ensure that your RAW IP is correctly configured and that the port is set to 9100.
Verify the Connection
To check if the connection is working, you can use the nmap command. First, make sure you have nmap installed by running the following commands in your terminal:
sudo apt-get update
sudo apt-get install nmap
Once nmap is installed, you can use it to test the connection. Run the following command:
nmap -p 9100 <your-raw-ip-address>
Replace <your-raw-ip-address> with the actual IP address you are trying to connect to. If the connection is successful, you should see a response indicating that the port is open:
If you continue to experience issues after following these steps, please check your network settings or consult your network administrator for further assistance.