Supported models
| Canon Colorado 1630 | Canon Colorado 1640 |
| Gloss and matte finishes, entry-level, slower, full featured | The first UVgel Colorado printer |
| Canon Colorado 1650 | |
| Gloss and matte finishes, high-end, fast, full-featured | |
Info
These printer models were formerly branded as Océ Colorado.
Learn more about these UVgel roll-to-roll models on the manufacturer's website:
- Colorado printers
- Canon Colorado 1630 documentation
- Canon Colorado 1640 documentation
- Canon Colorado 1650 documentation
Drivers
- Canon-Colorado-1630
- Canon-Colorado-1630-R3.1
- Oce-Colorado-1640-R1.2
- Oce-Colorado-1650
- Canon-Colorado-1650-R2.2
- Canon-Colorado-1650-R2.5
Info
The number "R" at the end of the driver name indicates the printer's firmware version.
If you do not find the firmware for your printer in the above list, you can use the immediately preceding version. For example, a printer with firmware 2.4 can use the driver ending in R.2.2.
Driver history
All drivers
-
CalderaRIP V17.2
- Improved media management of these drivers, thanks to the integration of a new "Delete" button on EasyMedia that allows you to delete the selected media/calibrations individually (previously it was only possible to delete them all):
- Improved media management of these drivers, thanks to the integration of a new "Delete" button on EasyMedia that allows you to delete the selected media/calibrations individually (previously it was only possible to delete them all):
Canon Colorado 1630
-
CalderaRIP V15.1
- Revision a (10/2022): for R3.1, fixed a driver error SIGSEGV when using the Gloss spot ink.
- R3.1 firmware supported.
-
CalderaRIP V14.1
- Canon Colorado 1630 supported.
Canon Colorado 1640
-
CalderaRIP V11.2
- Canon Colorado 1640 with R1.2 firmware supported.
-
CalderaRIP V11.1
- Revision e (10/2017): requires revision 1.1 of the printer firmware. New printer parameter: roll selection + alignment is sent to the printer (Left / Right / Center).
- Revision a (08/2017): fixed a problem causing duplicated media/profiles to be registered with a wrong "Automatic advance correction".
- Canon Colorado 1640 supported.
Canon Colorado 1650
-
CalderaRIP V16
- R2.2: fixed a driver error SIGSEGV when starting a print.
-
CalderaRIP V15.1
- Revision a (10/2022): for R2.2 and R2.5, fixed a driver error SIGSEGV when using the Gloss spot ink.
- R2.5 firmware supported.
-
CalderaRIP V13.1
- R2.2 firmware supported.
-
CalderaRIP V12.1
- Canon Colorado 1650 supported.
Inks
| Colorado 1630 | Colorado 1640 | Colorado 1650 | |
|---|---|---|---|
|
|
✔ | ✔ | ✔ |
|
|
✔ | ✔ | ✔ |
|
|
✔ | ✔ | ✔ |
|
|
✔ | ✔ | ✔ |
|
|
✔ | ✔ |