This latest firmware is available, by automatic download using the latest version 4.6.x, Barbieri Gateway software, available for download on https://www.barbierielectronic.com/service-support/
Then after installation and launching the Gateway software:
Go to Gateway > Tools > Check for Updates.
When your Gateway is version 4.6 you can download and install firmware 6.21 or newer using: Gateway > Tools> Firmware update.
Caldera version 15.1 or newer requires at a minimum firmware version 6.89 or newer.
Note: Make sure the auto-positioning Camera/Sensing unit is attached and detected as the firmware updates this too. Redo the upgrade when one didn't have the auto-positioning Camera/Sensing unit attached.
Alternative (manual loading of the firmware).
This is the firmware for the TotalColor LFP QB not the regular TotalColor LFP.
Firmware Update file, Version 6.21. https://www.dropbox.com/s/u7qcbwohr9w82pu/Firmware_LFP_qb_v621.zip?dl=0
For the Spectro LFP QB, this transfers the Firmware into the Platform and initiates the update process.
The Gateway software currently shows a message "Firmware update successful".
Please replace this message for the Spectro LFP QB only to "New firmware", correctly copied to instrument.
Update now in progress...
Please wait up to 10 minutes until instrument initializes and is "Ready".
For Instruments with Firmware older than 6.15, please contact Barbieri.