Epson SureColor S80600/L - Overview

CalderaRIP V19:

• In this version, two dedicated ML drivers have been developed so that you can benefit from new improvements to the multilayer feature, particularly when loading multilayer files from PrimeCenter. Additionally, some features incompatible with multilayer printing have been disabled during the loading of these files to reduce the risk of operation errors. Learn more.

    Warning

  If a multilayer driver ("-ML") is available for your printer, you can use it without having to purchase an additional driver. However, please note that only one driver can be used at a time.
  Before switching to the multilayer driver, make sure you re-import your customised colour management settings and presets. Learn more.

CalderaRIP V18.1:

• Revision A (06/2025): Fixed a bug that caused printer errors not to be processed for these drivers at the end of the job.

CalderaRIP V15.0:

• Revision A (01/2022): Printing 2 copies of the same job was sent to the error area while it correctly printed the two requested images.

CalderaRIP V14.1:

• Revision C: Fixes for HTM2 Y-direction margin, Multicopy in Managed mode, No Print direction models.

CalderaRIP V13.0:

• Epson SureColor S80600L supported.

CalderaRIP V12.1:

• Revision B (09/2019): Update for Epson Edge Dashboard.
• Revision A (07/2019):
  • Fix to bring back compatibility for macOS 10.11 (El Capitan), the driver was not launching on v12.1.
  • Epson Control Dashboard is now replaced By Epson Edge Dashboard.

CalderaRIP V11.1:

• Revision B (04/2017):
  • Small corrections in Status.
  • Fix a potential problem in “Rip then print”.
  • Fix misreading of "vardot level" setting.
• Revision A (11/2017):
  • Possible to set a custom margin (Page Setup) when using Custom Roll (EasySelect).
  • Metallic Silver data is correctly used when printing in Epson Precision Dot mode.

CalderaRIP V11.0:

• Revision C (07/2017): Metallic Silver data is correctly used when printing in Epson Precision Dot mode.
• Revision B (04/2017):
  • Small corrections in Status.
  • Fix a potential problem in “Rip then print”.
• Revision A (11/2016):
  • Fix "Use Printer Status" in USB.
  • Fix prints with "Metallic Silver".

CalderaRIP V10.2:

• Epson SureColor S80600 supported

CalderaRIP V10.2:

• Revision F (01/2017): Metallic Silver data is correctly used when printing in Epson Precision Dot mode.
• Revision E (04/2017):
  • Small corrections in Status.
  • Fix a potential problem in “Rip then print”.
• Revision D (11/2016): Fix prints with "Metallic Silver".
• Revision C (08/2016): New qualities for Banners in 720x720dpi: 4 Pass High Speed and 5 Pass (compatible with the new Firmwares launched in September 2016 and after).
• Revision B (08/2016): Bug fix: The order of the layers was wrong for the Print modes except “Epson Precision dot”. The top layer was at the bottom, and the bottom layer was at the top. Now, the order is as specified in the “Printer” tab.
• Revision A (06/2016):
  • Bug fix: jobs were blocked in the Spooler.
  • New media and margins size checking & addition of ink consumption for "Epson Precision Dot" modes.