Info
The update process for CalderaRIP has changed from Version 15. There are no more build patches: from now on they will be directly included in the default installation package. More info
March 2022
Version 15.0.4
Known issue
Fotoba ASP feature (Automated Slicer Positioning) can't be set up in V15.0.4, but it still is usable if it has already been set up in V15.0.3. If you use this feature and you want to update your CalderaRIP to V15.0.4:
- Set up the Fotoba ASP feature in CalderaRIP V15.0.3.
- Then update your CalderaRIP to V15.0.4 and you will be able to use Fotoba ASP feature.
Modules
 |
APPE: "Interpreter crashed signal 8" very rare random error |
|
Print Management: On macOS, when printing with high resolution, some annotations texts were truncated or disappeared |
|
Spooler: Printing order was not respected |
|
|
|
All translations have been updated |
Printer drivers
 |
Kornit: Costproof now includes White ink in the computation when using Ink Penetration method |
|
Epson SureColor SC-S80600: When using Compose module, annotations were not printed with jobs longer than 2m |
|
Epson SureColor SC-V7000: Bleed was missing when special ink was enabled with an RGB ICC profile |
|
Mutoh XpertJet 1682SR: NColor license was not available for all ink configurations |
Cutter & Trimmer drivers
 |
Graphtec FC9000: Faster detection of type 2 marks with optimization of the head movements |
|
Summa dual cutters: Thick bar removal to make the OPOS barcode readable |
February 2022
Version 15.0.3
Modules
|
Cut Management: There was a need to redo the printer configuration from scratch to make the Automatic registration marks and custom marks work correctly |
|
Print Management: Driver error when printing with USB-connected printers on Linux |
|
VisualCut: When selecting Positioning in Settings area for cutters that don't control panelling, the interface crashed |
Printer drivers
|
HP Stitch S1000: Enable HP Easy Profiling |
Cutter & Trimmer drivers
|
Zund: Methods for material filter couldn't be applied with ZCC V3.4 |
January 2022
Version 15.0.2
Info
If you have some issues with Automatic registration marks or custom marks, try to redo your printer configuration from scratch. This issue is solved from Version 15.0.3.
Modules
|
EasyMedia: Guide operator to correctly position the spectrophotometer on a P2P51X target |
|
Installation: Replace full disk access PDF for macOS with a link to Helpdesk |
|
APPE: The limitation was 27 Spot Colors instead of 123 on Debian 10 |
|
Cut Management: Automatic registration marks didn't work without Edge registration marks for GrandCut cutters |
|
Cut Management: Remove redundant Barcode39 function |
|
Nest-O-Matik: When nesting PDF multipage using HotFolders and Workflow, jobs were blocked at 100% in the spooler |
|
Print Management: English translation issue in the "Automatic Side B" tooltip |
 |
Application Bar: Remove the CalderaDock application |
Printer drivers
|
HP Latex: Barcode was printed outside of the job when the job height was too small |
Cutter & Trimmer drivers
|
CalderaXML: Possibility to generate cross-automatic registration marks |
|
Multicam: Possibility to remove orientation information in barcodes |
|
Generic DXF: The size of registration marks was doubled when using a custom thickness |
|
Summa: Barcode was printed outside of the job when the job height was too small |
|
Zund: Automatic registration marks were in double |
November 2021
Version 15.0.1
Modules
|
Installation: Update PDF to grant Full Disk Access on macOS | ||
|
The following applications were classified as obsolete and removed from the ISO and DMG:
|
|||
|
Installation: Replace the CalderaRIP V12 manual with updated CalderaRIP QuickStart documentation | ||
|
Installation: Wrong information about CalderaRIP version number in updates and patches | ||
|
Spooler: Empty warning window when trying to delete a job in a "blocked" state |
Printer drivers
|
Canon IPF GP Series - More info |
|
Epson SureColor F3000 - More info |
|
Epson SureColor SC-V7000 - More info |
|
Fujifilm Acuity Prime Series - More info |
|
Ricoh Latex L5130/60 and L5130e/60e |
|
swissQprint Karibu: New ability to print multi-page files by considering pages as layers or by generating jobs with multiple pages - More info |
|
HP Latex 3xx and 5xx: Drivers were raising SIGSEGV errors almost immediately after clicking on print action |
|
Some printers using natively NColor ink sets were asking for extra NColor tokens in the license |
Spectrophotometers
|
TotalColor qb Textile edition: Camera autodetection was not working |