Supported model
- Eco-solvent printer
- Maximum print area: 1615 mm – 63.58”
- This printer supports different types of inks (4 colours, CMYK)
Driver
Good to know
This printer communicates with the Caldera printer driver through the Mutoh connector. For this communication to work properly, the printer firmware must be kept up to date at all times.
- Mutoh-XpertJet-1641SR-Pro2
Driver history
-
CalderaRIP V19.2:
- The printer has been supported since this version
Resolution
Info
For each available resolution, you can choose either a variable drop or a fixed drop, indicated by “-Fix” at the end of the resolution name. Direction can also be set to unidirectional or bidirectional.
Unlike previous models, Effect (quality) cannot be controlled on this printer, so it does not appear in the Print Module Interface. The same applies to Scan multiplier, which is also not available for this model.
|
|
|
Mode
Warning
Before printing, make sure the ink type selected in Printer Settings (wrench icon) > Printer tab matches the ink installed in the printer: MS41, MS51, UMS21, or UVLA2. Selecting the wrong ink type may result in poor print quality.
|
|
✔ |
|
|
✔ |
|
|
✔ |
|
|
✔ |
Connection
| USB | |
| File | |
| Network | |
| Serial |