Supported models
| Canon Arizona 2340 / 2360 / 2380 GTF & XTF |
- Flatbed printer
- UV inks
- 2 sizes:
- GTF: 125 x 250 cm (49,2 x 98,4 inch)
- XTF: 308 x 250 cm (121,3 x 98,4 inch)
Learn more about these models on the manufacturer's website:
Drivers
Info - Starting from V16.2
Depending on the controller version of your printer (RX.X), you can use either the drivers listed below or the same ones but with the -R2 ending in their name.
- Canon-Arizona-2340
- Canon-Arizona-2360-CMYKWV
- Canon-Arizona-2360-CMYKWW
- Canon-Arizona-2380-CMYKcmWV
- Canon-Arizona-2380-CMYKcmWW
Driver history
-
CalderaRIP V17
- Canon-Arizona-2360-CMYKWV-R2;
- Canon-Arizona-2360-CMYKWW-R2;
- Canon-Arizona-2380-CMYKcmWV-R2;
- Canon-Arizona-2380-CMYKcmWW-R2:
- Revision B: Fix for missing layer selection in the Page Setup / White tab.
- All -R2 drivers:
- Now the use of new resolutions is enabled. Previously, the resolution names did not match any print mode IDs in the driver, resulting in an "Invalid resolution. Please contact your support" error.
-
CalderaRIP V16.2
- Following an update of the manufacturer's SDK, the -R2 drivers were developed for printers with these controllers. These new versions of the original drivers include new resolutions.
-
CalderaRIP V15.0
- Arizona 2380, Rev A: new printing modes Production-Plus and Quality-Plus
-
CalderaRIP V13.1
- All drivers supported since this version
Inks
| Arizona 2340 | Arizona 2360 | Arizona 2380 | |
|---|---|---|---|
| |
✔ | ✔ | ✔ |
| |
✔ | ✔ | ✔ |
| |
✔ | ✔ | ✔ |
| |
✔ | ✔ | ✔ |
| |
✔ | ||
| |
✔ | ||
| |
✔ | ✔ | |
| |
✔ | ✔ |
Some of these devices can use white and/or varnish as spot inks. Learn more with this dedicated article.
Warning
CostProof/CostView supported with limitations.