Supported models
|
Roland CAMM-1 GR2 640 max roll width: 70.1 inches (1782 mm) |
Roland CAMM-1 GR2 540 max roll width: 62.7 inches (1594 mm) |
| Roland website | |
Drivers
- Roland CAMM-1 GR2
Driver history
-
CalderaRIP V18.1:
- In VisualCut > Tools Settings and Priority, the default passes for the kiss cutting and pen tools have been updated from 0 to 1. Additionally, other default settings, including speed, force, and offset, are now considered, addressing previous oversight.
-
CalderaRIP V18:
- The user experience has been improved by limiting the values of Marks Placement in the Cutter Tools Configuration. The size of horizontal or vertical marks now ranges from 10 to 50 mm, while the thickness ranges from 1 to 2 mm, thus preventing you from using values outside the limits.
-
CalderaRIP V16.3
- Improvement of RawIP connection for big jobs
- Fix of shifted cut paths when not using paneling
-
CalderaRIP V16.0.2
- It is now possible to operate these cutters using the Ethernet connection. Also, registration marks are now detected, and the cutter rotates the data accordingly.
-
CalderaRIP V15.1.1
- Roland CAMM-1 GR2 supported
Installation
Type of license
| CutServer | |
| GrandCut (A/B) |
The Roland CAMM-1 GR2 is a VisualCut cutter:
Connection type
| Ethernet | |
| USB | |
| Serial | |
| File |
Info
This cutter works only with a USB or Ethernet connection with CalderaRIP. The File connection is mainly available to export to another software.
Paneling method with the distance parameter
Marks of the job are not detected, and panels are defined according to a configured length. Panels are cut one after the other. If a shape straddles 2 panels, it will be cut in two times.
- Positioning: select None for no mark detection. This driver has no barcode detection for automated roll cuts.
- Paneling above (mm): define the length of a panel where all shapes will be cut