Articles in this section

Mutoh XpertJet 1682SR (Pro and ProK) - Overview

Supported models

xpertjet-1682sr.png XpertJet-1682SR-Pro.png
  • Mutoh XpertJet 1682SR 
    • 64” / 162 cm
    • CMYK (x2) or CMYKLkLcLmOR
    • Roll2Roll (take up reel)
    • Solvent Ink
    • 2 printheads (unlike its predecessor, the 1641SR, which only has one)
  • Mutoh XpertJet 1682SR Pro(K) 
    • 64” / 162 cm
    • CMYK (x2) or CMYKLkLcLmOR
    • Roll2Roll (take up reel)
    • Solvent Ink
    • 2 printheads
    • New firmware with improvements in the print quality settings, and ink control
    • 189% faster than its predecessor (1682SR)

 

Drivers

  • Mutoh-XpertJet-1682SR
  • Mutoh-XpertJet-1682SR-Pro
  • Mutoh-XpertJet-1682SR-ProK

 

Driver history

  • CalderaRIP V17.2
    • Mutoh XpertJet 1682SR Pro. Revision A: Fixed some parameters of the ink carriage speed that caused the interface to refresh slowly.
  • CalderaRIP V17
    • Pro and ProK drivers. Revision A: Fixed a crash that occurred when selecting VSD3 in the main window (this parameter had previously been moved from the media parameters to the main window).
    • Mutoh XpertJet (all drivers/models): These drivers now add each job name to the header when communicating with the Mutoh Status Monitor (MSM) software.
  • CalderaRIP V16.3
    • Pro and ProK drivers. Revision A: Fixed a crash that occurred when selecting VSD3 in the main window (this parameter had previously been moved from the media parameters to the main window).
    • Mutoh XpertJet 1682SR Pro: Major changes were applied to the driver. Now instead of "Qualities", the driver allows the user to customize directly in the Print Module Interface the settings: effect, scan multiplier, direction, carriage speed, and dot family. This avoids the creation of different media for different resolutions, facilitating the work of color profiling.
  • CalderaRIP V16.0.2
    • Rev A: Changes were applied to 1682SR-Pro and ProK drivers, based on the new firmware, which includes improvements in the print quality settings, and ink control.
    • Drivers 1682SR-Pro and 1682SR-ProK supported
  • CalderaRIP V15.0.4:

  Info

CalderaRIP bug fix: NColor license was sometimes requested for some ink configurations. It is now available for all ink configurations.

  • Version 15.0
    • Rev A: Bug with CMYKcmkO color mode has been fixed
  • Version 14.1
    • Rev C: Custom Inkset support added
    • Rev A
  • Version 13
    • Driver 1682SR supported

 

Inks

  Info

Printer driver(s) compatible with Custom Inksets. For more information, partners and resellers should consult the Partners Portal; end users can find details on our website.

  Set 1 Set 2
1_Cyan.png   Cyan ✔✔
2_Magenta.png   Magenta ✔✔
3_Yellow.png   Yellow ✔✔
4_Black.png   Black ✔✔
5_Light_cyan.png   Light cyan  
6_Light_magenta.png   Light magenta  
7_Gray.png   Light black  
Orange.png   Orange  

 

Connection

Circle.png USB
Circle.png File
Check_circle.png Network
Circle.png Serial
Was this article helpful?
0 out of 0 found this helpful