Resolution & Quality
Info
"3D" stands for a variable drop (3 dots).
| Mode | Resolution |
| Production_1Pass-3D | 600x300 |
| Production_2Pass-3D | 600x600 |
| Production_3Pass-3D | 600x900 |
| Production_4Pass-3D | 600x900 |
| Production_6Pass-3D | 600x1800 |
| Quality_1Pass-3D | 900x300 |
| Quality_2Pass-3D | 900x600 |
| Quality_3Pass-3D | 900x900 |
| Quality_4Pass-3D | 900x1200 |
| Quality_6Pass-3D | 900x1800 |
| High Quality_1Pass-3D | 1200x300 |
| High Quality_2Pass-3D | 1200x600 |
| High Quality_3Pass-3D | 1200x900 |
| High Quality_4Pass-3D | 1200x1200 |
| High Quality_6Pass-3D | 1200x1800 |
Loading
- Roll 1.8m
- Custom (...)
Custom loading with EasyMedia
EasySelect is the capability for CalderaRIP to use the size and type of loaded media in the printer.
This printer supports 1 level of selection:
- CustomLoading: uses a custom size (sheet or roll) defined at last moment in the Print module interface.
Media
This driver comes with only a default media not calibrated.
Discover how to manage media with EasyMedia by clicking here.
Mode
- CMYK
- CMYKcm
- CMYKRG (only on Artrix Omni Pro)
Actions
The device supports only two actions:
- Print.
- Nest.
"Rip", "Rip then Print", and "Keep the ripped file" actions are disabled, as the "Print" action sends a RIP file to the controller-mounted directory. You can keep RIP files in the controller and manage to reprint them on the controller directly.