This device can use an Optimizer as Spot Ink. Its use is mandatory as a Primer since AP-640's inks are water-based.
To configure it, you need to go to the Page Setup module, open the corresponding tab and then click on Enable separation:
Info
To have more details on the topic, please refer to this article dedicated to Spot Inks.
Setting up the optimizer for a linearization
If your production requires you to create or (re)linearize color profiles from scratch, you must perform a further step in EasyMedia. This will prevent you from encountering the "Please enable the optimizer with valid parameters" error in the Spooler, when you try to print the color targets.
- Go to the Linearization tab
- Click on the Printer... button
- A pop-up will appear. Enable the Optimizer covering (%) with a value of your convenience
- Click Ok
|
|
|
Now you can continue with the creation/(re)linearization of your color profile.