Printhead operation
Dgen Teleios Omni Pro
This device has 5 in-line printheads with an inkjet pre-treatment called CBS (Color Booster Solution).
System-wise, the inkset would be KCMY123 (technically speaking a 7-color printer). Printheads 1 and 2 can work as the spot inks and/or the Scarlet (Red) and Green, while the 3rd printhead would work as the CBS. The printhead map looks as follos:
Info
White areas remain free of CBS. The quantity of CBS would always be the same, independently of the quantity of the color.
Dgen Teleios Grande Omni
Like the previous model, the inkset would be KCMY123 (technically speaking a 7-color printer). However, this device has 10 print heads arranged in two rows. Printheads 1 and 2 can work as the spot inks and/or the Scarlet (Red) and Green, while the 3rd printhead would work as the CBS. The printhead map looks as follows:
Spot ink (CBS) setup with CalderaRIP
As mentioned before, these printers can use a pre-treatment called CBS (Color Booster Solution) as spot ink.
To configure it, you need to go to the Page Setup module, open the corresponding tab and then click on Enable separation:
Info
To have more details on the topic, please refer to this article dedicated to Spot Inks.