Supported models
InnoHue IF2513GS, IF3220GS and 5300 (photo)
-
InnoHue 5300:
- UV inkjet printer with Konica printheads
- Maximum printing size: 5.30m
-
InnoHue IF2513GS / IF3220GS:
- Flatbed UV printer with Ricoh Gen 6 printheads
- Maximum printing size:
- IF2513GS: 2500x1250 mm
- IF3220GS: 3200x2050mm
- Visit the official website of Cetian (InnoHue reseller)
Driver
- InnoHue-5300
- InnoHue
Driver history
-
CalderaRIP V17
- InnoHue: Addition of CMYKcmkR mode for this driver
-
CalderaRIP V16.3.1
- InnoHue-5300 is supported since this version
-
CalderaRIP V11.20
- InnoHue is supported since this version
Resolutions
Info
"3D" or "3Drop" Stands for 3 drops (variable dot).
| Innohue-5300 | InnoHue |
|
|
Inks
Info
Printer driver(s) compatible with Custom Inksets. For more information, partners and resellers should consult the Partners Portal; end users can find details on our website.
| Cyan | |
| Magenta | |
| Yellow | |
| Black | |
| Light Cyan | |
| Light Magenta | |
| Light Black* | |
| Red* |
* Only on the InnoHue driver, starting from its V17 version.
Spot Ink
- Innohue-5300: This device can use white and varnish as spot inks.
- Innohue: These devices can use white as a spot ink.
To configure them, you need to select the corresponding resolution and then go to the Page Setup module:
Once there, open the corresponding tab, click on Enable separation, and choose the separation Method that you may require. Click here to learn more.
Connection
| USB | |
| File | |
| Network | |
| Serial |