These devices can use Primer, White, and Clear Coat (Varnish) as spot inks.
To configure these spot inks, you need to go to the Page Setup module, open the corresponding tab, and then click on Enable separation:
Info
To have more details on the topic, please refer to this article dedicated to Spot Inks.
Additional spot ink settings
At the lower part of the corresponding tabs, between Available Sources and Linearization, you will find additional settings for the use of spot inks.
Primer tab
- Mode: You can decide how the Primer ink will be printed. Options are single and multi-layer.
White tab
- Mode: You can decide how the White ink will be printed. Options are single and multi-layer.
- Order: White is printed either Under or Over the color layers.
Clear coat (varnish) tab
- Mode: You can decide how the Clear coat (varnish) ink will be printed. Options are single-layer, multi-layer, and emboss.
- Emboss Layers: You can decide how many layers of embossing are required, between 1 and 20.
- Finish: Options are Matte, Gloss, and Middle Layer.