Supported Models
| Roland TrueVIS VG-540 (54") | Roland TrueVIS VG-640 (64") |
Drivers
Warning
It is essential to use the correct driver based on the printer's ink setup, as the print modes differ. Avoid using a 4-color driver to print in CMYK mode on a 7- or 8-color printer, as this may result in incorrect output.
VG2 drivers are not compatible with VG printers, and VG drivers are not compatible with VG2 printers.
All drivers support both TrueVIS VG-540 and TrueVIS VG-640 printers.
- Roland-VG-4C (2 x CMYK)
- Roland-VG-7C (CMYKcmk)
- Roland-VG-CMYKcmkW
- Roland-VG-CMYKcmkW-TR2 (TrueVIS TR2 inks only). This driver can be used to drive the VG-CMYKcmk-TR2 as well.
Driver History
-
Version 17.3:
- Roland SP (VisualCut driver for these devices): Optimization of the cutting order when using "Instant Cutting", as well as the integration of tools configuration (using a VisualCut export).
-
Version 15.0:
- Roland-VG-CMYKcmkW-TR2 supported for TrueVIS VG-540/640 with TR2 inks
-
Version 11.1 (09/2017):
- Revision A (VG-4C only): Support of TrueVIS Element ink added.
- Revision A (all drivers): The remaining levels of cartridges in slots 4 and 6 were swapped in the status window.
-
Version 10.2 (10/2016):
- Revision B: Added 'rewind after print' parameter. Removed value 'Light' from the "Cleaning while printing" parameter.
-
Version 10.2 (07/2016):
- Revision A: Fix the issue when the Ink level colors were mixed in the status and did not match the correct cartridge slot.
- Revision B: Added 'rewind after print' parameter. Removed value 'Light' from the "Cleaning while printing" parameter.
- TrueVIS VG-540/640 supported
Inks
| TrueVIS VG-540 | TrueVIS VG-640 | |
|
|
✔ | ✔ |
|
|
✔ | ✔ |
|
|
✔ | ✔ |
|
|
✔ | ✔ |
|
|
✔ | ✔ |
|
|
✔ | ✔ |
|
|
✔ | ✔ |
|
|
✔ | ✔ |