Mimaki UCJV150 / 160 / 300 - Overview

CalderaRIP V18:

• Correction of the file name/ID generation process, to avoid names with negative or incorrect values. 

CalderaRIP V17.3:

• Now the driver supports intermediate marks in the left/right edges of the job.

    Info

  These new intermediate marks must be enabled in the Cutter Tools Configuration window, by setting a distance between marks and enabling the marks on left and right edges.
  Default settings remain as formerly set to avoid behavior changes on current configurations.

• Fixed a crash that occurred when choosing "None" for positioning in the VisualCut module. With this fix, the driver is more adaptable and allows you to perform lettering.
• Fixed the cut marks precision to improve accuracy in production.

CalderaRIP V15.1

• Revision B (01/2023): Removed the error message that appeared when the printer resumed from sleep mode. Users can now print directly without needing to clean temporary files or restart the printer.
• Revision A (06/2022): The "Cut Media" option is now fully functional.

CalderaRIP V11.2

• Revision D (10/2018): Resolved the crash introduced in Revision C and fixed the Instant Cut feature.
• Revision C (09/2018): Addressed the issue with Print & Instant Cut when performing a reprint or using the RIP then Print function.
• Revision B (08/2018):
  • Fixed an issue with Costproof consumption accuracy when using overprint and white-only settings.
  • Fixed an issue that prevented printing using Fixed Dot, which displayed Error 206 on the printer panel.
• Revision A (07/2018):
  • Fixed a network connection issue that occasionally caused the printer to be unrecognized during printing, resulting in an "Initialization failed" error.

  • Added support for 2-layer and 3-layer printing for MultiLayer using a single source image. 

      Info

    A separate "Mimaki UCJV300-8c-ML" driver has been created for 4-layer and 5-layer printing with different images, which does not support S&R, Nestomatik, trimmers, etc.

• Mimaki UCJV150-4c supported

CalderaRIP V16.0.1

• Revision A (12/2022): Removed the error message that appeared when the printer resumed from sleep mode. Users can now print directly without needing to clean temporary files or restart the printer.

CalderaRIP V15.1

• Revision A (06/2022): The "Cut Media" option is now fully functional.

CalderaRIP V11.2

• Revision D (10/2018): Resolved the crash introduced in Revision C and fixed the Instant Cut feature.
• Revision C (09/2018): Addressed the issue with Print & Instant Cut when performing a reprint or using the RIP then Print function.
• Revision B (08/2018):
  • Fixed an issue with Costproof consumption accuracy when using overprint and white-only settings.
  • Fixed an issue that prevented printing using Fixed Dot, which displayed Error 206 on the printer panel.
• Revision A (07/2018):
  • Fixed a network connection issue that occasionally caused the printer to be unrecognized during printing, resulting in an "Initialization failed" error.

  • Added support for 2-layer and 3-layer printing for MultiLayer using a single source image.

      Info

    A separate "Mimaki UCJV300-8c-ML" driver has been created for 4-layer and 5-layer printing with different images, which does not support S&R, Nestomatik, trimmers, etc.

• Mimaki UCJV300-4c supported

CalderaRIP V16.0.1

• Revision A (12/2022): Removed the error message that appeared when the printer resumed from sleep mode. Users can now print directly without needing to clean temporary files or restart the printer.

CalderaRIP V15.1

• Revision A (06/2022): The "Cut Media" option is now fully functional.

CalderaRIP V13

• Revision A (10/2019): Added varnish modes.

CalderaRIP V12.1

• Revision A (10/2019): Added varnish modes.

CalderaRIP V12.0

• Revision B (03/2019): The 300x900 resolution is now available for multilayer printing with PVC.
• Revision A (12/2018): The overprint feature has been added.

CalderaRIP V11.2

• Revision D (10/2018): Resolved the crash introduced in Revision C and fixed the Instant Cut feature.
• Revision C (09/2018): Addressed the issue with Print & Instant Cut when performing a reprint or using the RIP then Print function.
• Revision B (08/2018):
  • Fixed an issue with Costproof consumption accuracy when using overprint and white-only settings.
  • Fixed an issue that prevented printing using Fixed Dot, which displayed Error 206 on the printer panel.
• Revision A (07/2018):
  • Fixed a network connection issue that occasionally caused the printer to be unrecognized during printing, resulting in an "Initialization failed" error.

  • Added support for 2-layer and 3-layer printing for MultiLayer using a single source image.

      Info

    A separate "Mimaki UCJV300-8c-ML" driver has been created for 4-layer and 5-layer printing with different images, which does not support S&R, Nestomatik, trimmers, etc.

• Mimaki UCJV300-8c supported

CalderaRIP V19

• Fixed a bug that prevented the software from executing rasterization jobs when a color layer was placed over a white layer.

CalderaRIP V15.1

• Revision A (06/2022): The "Cut Media" option is now fully functional.

CalderaRIP V11.2

• Revision D (10/2018):  Resolved the crash introduced in Revision C and fixed the Instant Cut feature.
• Revision C (09/2018): Addressed the issue with Print & Instant Cut when performing a reprint or using the RIP then Print function.
• Revision B (08/2018):
  • Fixed an issue with Costproof consumption accuracy when using overprint and white-only settings.
  • Fixed an issue that prevented printing using Fixed Dot, which displayed Error 206 on the printer panel.
• Revision A (07/2018):
  • Fixed a network connection issue that occasionally caused the printer to be unrecognized during printing, resulting in an "Initialization failed" error.
• Mimaki UCJV300-8c-ML supported