CalderaRIP V14.1 - Changelog

Updated October 06, 2022 12:45

In this article:

Update 210820

Bleed: Fix corner deformation in standard Bleed mode with Cut and Backlit Mirror enabled (#1814)
Compose: Added cutter marks in Compose was not printed (#2927)
ZCC3: Fixed crash after switching from ZCC to ZCC3 and synchronizing methods and materials (#2928)
Graphtec CE7000: Fixed accuracy issue when more than 2 intermediate registration marks in horizontal or vertical were printed. (#2931)
TotalColor qB: Fixed Number of measures per Patch, frequency of calibration, and aperture were not applied in the device. (#2877)
PS2PDF: Fixed crash when the source folder contained "+" sign or the name was missing a "ps" extension. (#1084 and #1157)
Fileman: Fixed Hotfolder and Workflow warning "Optimizer - Can't open file: No such file or directory" when Alpha channel was not enabled but Chroma Optimizer was selected (#1189)
DTG Drivers: In contone 8b, for "Black T-shirt" and "Colored T-shirt", the white channel is now generated (#2991)

Kongsberg-JDF: Customize Barcode Position (#2903)
- When using compose to place the cut marks, you can now save media by using negative offset to position barcodes inside the compose document
- be careful, it does not concern alignment, only margin from image border

Printclient: fixed a bug where color libraries were not appearing (#1103, #2920)

GrandCut: the SinaJet brand is now officially supported (#2896)
- Based on CalderaXML file format

SEI Laser: Extra mark at origin (#2875)
- The extra mark at origin allows to visually orientate the sheet, increasing the operator's efficiency
- It can also be disabled in the Tools configuration window to match previous workflows
Summa GoProduce: AutoRotate Job feature (#2808)
- Automatically rotate a job to fit the width of the cutter
Summa tray One is now supported (#2807)
- Sheet feeder for S One D60 D75 and SummaCut D60 cutters
- Watch this video for more information: https://www.youtube.com/watch?v=Txv5P8mlY-k
Summa OPOS bar code option for single jobs (#2806)
- Addition of a new option to initiate barcode detection from Summa cutters' panel, rather than from VisualCut
- Allows cut operators to be more efficient directly from the cutter's panel
Graphtec FC9000, CE7000 and FCX2000: Custom registration Edge marks (#2838)
- Intermediate marks can now be deactivated via the Tools configuration window
Kongsberg JDF: Customize barcode position (#2903)
- It is now possible to use negative values for barcode placement

EasyMedia
- Fix IT8.7-4 12 pages error: "Can't split this target into multiple jobs: internal error" (#2881)
- Fixing configuration of M3 measurement with X-Rite i1iO3 table (#2855)
Print
- File confirmation works with Multi job and file printers (Multilayer file drivers) (#2854)
- Print server: Fix memory leaks and concurrency issues (#2786)
Cut
- Removed a debug method that was displayed in the SummaFlex driver (#2900)
- Summa F1612: Automatically generated cut marks were not printed (#2869)
- Graphtec USB NoPos: Improved stability in communications for modes without cut marks (#2894)
  - Graphtec FC9000: fix "need to click twice on cut to be able to cut without marks" (#899)
  - Graphtec FC8000: fix "test cut not working and force not changing" (#1030)
- Graphtec FC9000, CE7000, FCX2000: Fix of ID position (#2892)
- Fix the update of the number of copies and done status that was affected to an incorrect job when changing selected jobs too fast (#2853)
  - Now the selection of jobs is blocked until the sending process is done
Trimmers
- The OPOS Xtra feature does not require a Trim-O-Matik license anymore (#2859)

FIleman: Fileman was not able to load PNG files with Large XMP metadata. The limitation is now raised from 8 Mb limitation to 80 Mb (#2679).
Printers: HP Latex 700W & 800W with at least a revision A (V14.1) of the driver now supports the White ColorBars (#2614).
VisualCut: Ethernet connection is now supported on Mutoh ValueCut II, GCC, and GCC RX cut drivers (#2070).
GrandCut: New Zund Cut Center 3 driver. It is now possible to associate cut contour and methods per media, for example, associate PDFTrimBox differently depending on the media (#2696).
VisualCut/GrandCut: Allow edition of marks thickness to compensate ink bleeding on some media (for Graphtec FC9000, Graphtec CE7000, Graphtec FCX2000 OptiScout, SummaFlex, I-Script Kongsberg,DXF-based models, DXF-based models and CalderaXML-based models) (#2688).
GrandCut: Simplify populate methods

EasyMedia: PS2PDF Conversion failed because of the length of the input file names. A fix has been implemented and you no longer have to rename the file (#2651).
EasyMedia: Roland VG2 CMYKkOG and Roland VF2 CMYKkOGW no longer need the Custom Inkset option.
VisualCut: Having a Trim-o-Matic license is no longer mandatory to use the OPOS Xtra Cutter. The trimmer is now it is called OPOS Xtra (#2684).
EasyMedia: A fix has been implemented for the Xrite i1iO2. An error (code 2008) was causing a crash because of a reading error in M1 conditions after a bad placement of the second page (#2122).
PrintManagement: The marks were not always rotated when selecting a mirror method, leading to a mismatch in the print.

Fileman: Extract all Contour & Extract all Shapes options have been removed from the cut options.
Cutters: Mutoh KONA and Ultima are now obsolete (#2789).