Supported Models
- Flatbed printers with roll-to-roll as an option.
- "i" Models are fitted with faster print head types.
- "S" Models are speed-print models (double printheads of the same ink).
Drivers
|
|
|
Drivers history
Nyala-4
-
CalderaRIP V18.1.1:
- We've resolved an issue that caused the software to crash when printing a single-layer image.
-
CalderaRIP V17.1
- Revision A:
- Only Nyala-4: The two resolution changes introduced in the previous version has been reverted, and the revision was removed from WorkSpace and CalderaDock.
- Revision A:
-
CalderaRIP V17
- Revision A:
- Only Nyala-4: The resolutions 1015x450-2L and 1015x900-2L have been changed to match the related info displayed in Amber (SwissQPrint's interface software) [REMOVED].
- All Nyala drivers: The default loaded qualities of these drivers have been changed to avoid the error message "Can't find a printer quality value matching the settings. Please contact your support".
- Revision A:
-
CalderaRIP V15.0
- Revision B (03/2022): Fixed bug on adjusted horizontal printing resolutions
- Revision A (02/2022): Adjusted horizontal printing resolutions
- Supported since this version
Impala-4
-
CalderaRIP V15.0
- Revision B (03/2022): Fixed bug on adjusted horizontal printing resolutions
- Revision A (02/2022): Adjusted horizontal printing resolutions
-
CalderaRIP V15.0:
- Supported since this version
Oryx-4-i
-
CalderaRIP V15.0:
- Supported since this version
Table sizes and maximum roll width
| Table size (mm) | |
|---|---|
| Oryx-4-i, Impala-4, Impala-4-i | 2500 x 2030 |
| Impala-4S-i | 2500 x 2030 |
| Nyala-4, Nyala-4-i | 3200 x 2030 |
Info
Please note that, in Table mode, an extra 5 mm margin in each direction is allowed as the machine can print outside the vacuum zone.
Inks
| Impala-4S-i | Nyala-4S-i | Oryx-4-i | Impala-4 | Impala-4-i | Nyala-4 | Nyala-4-i | |
|---|---|---|---|---|---|---|---|
| Number of channels | max 5 | max 9 | |||||
| |
✔ | ||||||
| |
✔ | ||||||
| |
✔ | ||||||
| |
✔ | ||||||
| Special inks | ✔ | ||||||