Supported Models
Flatbed printers with an optional roll-to-roll configuration:
Info
The “i” models are equipped with faster printheads.
Table sizes and maximum roll width
Info
In Table mode, an additional 5 mm margin is allowed on each side, as the machine can print outside the vacuum zone.
| Model | Table size (mm) |
|---|---|
| Impala(-i) | 2500 x 1600 |
| Nyala(-i) | 3200 x 1600 |
| Oryx | 2500 x 1500 |
Drivers
- swissQprint-Impala
- swissQprint-Impala-i
- swissQprint-Nyala
- swissQprint-Nyala-i
- swissQprint-Oryx
- swissQprint-Oryx-WithProfiles
Driver History
-
CalderaRIP V19.2:
- Revision A: Fixed potential unexpected behavior when using special inks as varnish, where supported by the printer model.
-
CalderaRIP V18.1.1:
- (05/2025) Resolved an issue that caused the software to crash when printing single-layer images.
-
CalderaRIP V14.1:
- (03/2021) Revision A: Fixed an issue causing the print field to be duplicated.
-
CalderaRIP V11.2:
- Revision C: Fixed incorrect quality names and codes for the Nyala-i, Nyala-2i, Impala-i, and Impala-2i.
- (05/2018) Revisions A/B: Added the ability to change the number of copies and the orientation at the last moment in the Amber controller, making lens production and Rob automation easier.
-
CalderaRIP V11.0:
- (02/2017) Revision A: Added a new printing resolution: 1080x1080.
-
CalderaRIP V10.10:
- Added support for the Impala-i model.
-
CalderaRIP V10.0:
- (01/2015) Revision A: For Impala, Nyala, Nyala-i, Nyala-2, and Nyala-2-i, added support for printing varnish in Spot mode (Spot/Overlay option).
-
CalderaRIP V9.20:
- Added support for the Nyala-i model.
-
CalderaRIP V9.00:
- Added support for the Nyala model.
-
CalderaRIP V8.01:
- Added support for the Impala model.
-
CalderaRIP V7.57:
- Added support for the Oryx model.
Inks
Info
Printer driver(s) compatible with Custom Inksets. For more information, partners and resellers should consult the Partners Portal; end users can find details on our website.
| Impala(-i) | Nyala(-i) | Oryx | |
| Number of Channels | 9 Max. | 9 Max. | 8 Max. |
| Cyan | ✔ | ||
| Magenta | ✔ | ||
| Yellow | ✔ | ||
| Black | ✔ | ||
| Special Inks | ✔ | ||
Connection
You may be interested in reading: How to import an SQPE file to CalderaRIP?
| USB | |
| File | |
| Network | |
| Serial |