Info
Settings explained in this article are available for the following Drivers:
- swissQprint Karibu from Version 15.0
- swissQprint Kudu from Version 16.0
For more information about the standard multipage printing configuration, please refer to this article.
The drivers for swissQprint printers fitted with a Lory controller contain additional settings to configure multi-page printings.
These settings are available in the Main tab of the Page Setup window:
Output
You have the choice between 3 options:
One multi-page job
The input multi-page PDF is sent to the printer as 1 job with multiple pages. You can choose which pages you want to print on the controller.
| Input |
And you can specify which configuration you want:
| Output | ||
| Single sided | Recto-verso 1-2, 3-4, ... | Recto-verso 1-1, 2-2, ... |
One multi-layer job
The input multi-page PDF is sent to the printer as 1 job with a single page. The different pages of the PDF file are interpreted as layers, that will be printed one on each other.
| Input | Output |
Multiple single-page jobs
The input multi-page PDF is sent to the printer as 1 job with a single page. This is the standard behavior for almost all drivers.
| Input | Output |