Mimaki JFX200-2513 - Overview

Supported model

High-performance large format flatbed LED UV printer. Learn more about it by clicking here.

Drivers

• Mimaki-JFX200-4c
• Mimaki-JFX200-6c

Drivers history

• CalderaRIP V14:
  • Revision A: Addition of embossing effect.

• CalderaRIP V9.20:
  • Printer supported since this version.

Print Module Interface

Resolutions

• 300x450HQ
• 600x600
• 600x900
• 1200x1200

Loading

• B0, A0, Custom until 2.5 m x 1.3 m

EasySelect is the capability for CalderaRIP to use the size and type of loaded media in the printer.

This printer supports 2 levels of selection:

• CustomLoading: uses a custom size (sheet or roll) defined at last moment in the Print module interface.
• AutoLoading: uses the size of the media currently loaded in the printer.

Inks

• UV
• Special inks
  • White
  • Varnish
  • Primer

Modes

• CMYK

Qualities

Qualities are composed of several passes and directions:

• Bi: Bidirectional
• Uni: unidirectional

Connection

• USB 2.0

Printer settings

Printer tab

Embossing effect

The 3D embossing effect can be enabled by selecting the "Embossing" entry in the Wrench/Printer Settings tab:

In the Page Setup/Varnish tab, the source of the generation of varnish must be selected.

Media tab

Limitations

CostProof/CostView is supported only with the action “Print”.