Supported model
- Ultra-High Speed Flatbed UV LED Printer.
- Production speeds of up to 60sqm/h.
- Maximum print size of 2.1 x 3.1 m.
- Learn more on the official website.
Drivers
- Mimaki-JFX500-4C
- Mimaki-JFX500-6C
Driver History
-
CalderaRIP V11:
- Revision A (02/2017): Bug Fix #3856: It is now possible to print white at a resolution of 1200 x 1200.
-
CalderaRIP V10.20:
- Revision B (02/2017): Bug Fix #3856: It is now possible to print white at a resolution of 1200 x 1200.
- Revision A (07/2016): The drivers now support MAPS 2 at 1200 x 1200 fixed dot at normal speed. Three bug fixes have also been implemented: the driver no longer crashes with Primer inks; fixed dot is now supported when printing is not made at the origin; and margins set in the ServerAdmin are now correctly taken into account.
-
CalderaRIP V9.20:
- Both drivers has been supported since this version.
Connection
Info
Please note that, for these models, it is required to use only one RIP station per USB printer. We recommend that you read our guide: Best practices for the USB communication of Mimaki devices.
| USB | |
| File | |
| Network | |
| Serial |
Print Module Interface
Resolutions
|
|
Loading
- A0, A1, A2, A3+, A3, A4
- LetterUs, LegalUS
- B5, B4, B3, B2, B1, B0
- Full
- Custom (...)
EasySelect is the capability for CalderaRIP to use the size and type of loaded media in the printer.
This printer supports 2 levels of selection:
- CustomLoading: uses a custom size (sheet or roll) defined at last moment in the Print module interface.
- AutoLoading: uses the size of the media currently loaded in the printer.
Media
This driver comes with only a default media not calibrated.
Discover how to manage media with EasyMedia by clicking here.
Mode
Info
Printer driver(s) compatible with Custom Inksets. For more information, partners and resellers should consult the Partners Portal; end users can find details on our website.
- CMYK
The 6C driver can use White, Varnish, and Primer as Spot Inks. To configure them, you mut go to the Page Setup module:
Then, open the corresponding tab, click Enable separation, and select the Method corresponding to your production.
Qualities
| 4C driver | 6C driver |
|
|
Actions
Available actions are:
- Print: This action rips and prints the file simultaneously.
- RIP: Rips the file and holds it in the Spooler.
- RIP then Print: Rips the entire file, and then sends the file to print.
- Nest: This action nests all images sent to the printer and holds them in the Spooler.
Keep Ripped file (only available with "Print" and "Rip then Print" actions). When this box is checked, the sent file remains in the Spooler so you can reprint the job later on.