Summa F series

SummaFlex

• CalderaRIP V18.2:
  • Now, this driver can automatically execute cut jobs on printed media generated with CalderaRIP. Previously, the associated barcodes were not detected due to overlapping with the origin of the registration marks. While a manual execution workaround was available, this functionality has now been integrated into the software, allowing for improved detection and efficiency.
• CalderaRIP V17.3.0:
  • A new "Add direction mark" checkbox was added to the Misc. area of the Cutter Tools Configuration for most cutting drivers. Activating this new field adds direction marks in the form of a triangle pointing to the bottom edge of the cut job, which significantly speeds up the operators' work when managing these files.
• CalderaRIP V16.0.2:
  • (01/2023) It is no longer necessary to scale the marks down on the cut controllers since now they have the same size both in the print and in the cut file.
• CalderaRIP V11.1:
  • (11/2017) The port parameter is now correctly used when connecting two (or more) Summa cutters by USB.
  • (11/2017) Fixed wrong job orientation and fixed missing up and down edge marks.
  • (10/2017) Intermediate marks are now present when using the automatic rotation of marks.
  • (09/2017) Added autonomous mode (Autocut) for Summa cutters (requires the positioning set to “Single with marks” or “none” and connection set to “File”).
• CalderaRIP V11.0:
  • (02/2017) New method "Rotary Knife" and increased PostNet barcode height to fix a potential reading issue.
  • (11/2016) Fix for Summa cutters USB communication (Linux).
• CalderaRIP V10.2:
  • (03/2016) OptiScout and SummaFlex cutters have now a method configuration tab in the Cutter Tool configuration window (Tool button) in the Print module.
• CalderaRIP V10.1:
  • (11/2015) Fixed SummaFlex mark positions according to a new orientation.
• CalderaRIP V9.00:
  • Summa F series with SummaFlex software supported.

SummaFlex Connected

• CalderaRIP V17.3.0:
  • A new "Add direction mark" checkbox was added to the Misc. area of the Cutter Tools Configuration for most cutting drivers. Activating this new field adds direction marks in the form of a triangle pointing to the bottom edge of the cut job, which significantly speeds up the operators' work when managing these files.
• CalderaRIP V11.2:
  • (03/2018) Updated tool names.
• CalderaRIP V11.1:
  • (11/2017) The port parameter is now correctly used when connecting two (or more) Summa cutters by USB.
  • (09/2017) Added autonomous mode (Autocut) for Summa cutters (requires the positioning set to “Single with marks” or “none” and connection set to “File”).
• CalderaRIP V11.0:
  • (11/2016) Fix for Summa cutters USB communication (Linux).
• CalderaRIP V9.0:
  • Summa F series with SummaFlex software supported.

Summa GoProduce

• CalderaRIP V18.2:
  • Now, this driver can automatically execute cut jobs on printed media generated with CalderaRIP. Previously, the associated barcodes were not detected due to overlapping with the origin of the registration marks. While a manual execution workaround was available, this functionality has now been integrated into the software, allowing for improved detection and efficiency.
• CalderaRIP V17.3.1:
  • Correction of the file name/ID generation process, to avoid names with negative or incorrect values.
• CalderaRIP V17.3.0:
  • A new "Add direction mark" checkbox was added to the Misc. area of the Cutter Tools Configuration for most cutting drivers. Activating this new field adds direction marks in the form of a triangle pointing to the bottom edge of the cut job, which significantly speeds up the operators' work when managing these files.
• CalderaRIP V12.0:
  • Summa F series with GoProduce software supported.