Print management. Fixed a bug that caused multilayer jobs on some V16.3 drivers to exhibit unexpected behavior.

HP Latex 630 (W).

Summa S Class 3.

Installation (on Linux): The size of the installation ISO file has been downsized from 5GB to 3.2GB, freeing up more space for users' operation.

Tiling: Now the name of the generated tiles matches the label pattern.

Cost Management: Starting with this version, the CostView web module interface is deprecated.

The CostEstimation option (CostView + CostProof) is retired.

Adobe PDF Print Engine (APPE): On macOS, update and fix of the color management issue that appeared in V16.0 due to an incompatibility with the previous version of APPE.

Cost management: On macOS, and with the Adobe PDF Print Engine update, CostProof now works correctly.

Installation / Server Admin: Fix a bug that caused custom drivers of the same product version not to work on different product patches.

Also, an inconsistency between the official build numbers and those contained in Caldera's system files was also corrected.

Dgen Papyrus Grande K – More info

Dgen Teleios Omni (Grande and Pro) - More info

EFI Pro 30H - More info

Flora XTRA 3220 UV- More info

Homer Kyocera Special – More info

InkTec Jetrix XGR320 – More info

Kyocera Forearth - More info

Roland EU-1000MF – More info

Atexco Model X Plus: Now the driver supports x2 4-color configuration. New resolutions were also added.

Dubuit Far East: Now the driver supports CustomInkset.

EFI VUTEk Qr Series: Revision A with new resolutions added.

Generic PRT2: It is now possible to generate a mirrored BMP thumbnail.

Mimaki UJV500: The driver now allows a range of values between -2000mm and 2000mm in the "Feed adjust" setting (located in the Media tab of Printer settings).

Mutoh XpertJet 1682SR Pro: Major changes were applied to the driver. Now instead of "Qualities", the driver allows the user to customize directly in the Print Module Interface the settings: effect, scan multiplier, direction, carriage speed, and dot family. This avoids the creation of different media for different resolutions, facilitating the work of color profiling.

SwissQprint Kudu / Karibu: Following an update on these printers' controllers (Lory V3.3), now both drivers support the latest specifications on the exchange format (SQPE file). 

240 Tech OvalJet DTG: The job ticket format has been fixed (now is a .job file).

Canon Colorado M Series: Added a High-Density parameter for Matte resolutions that was missing.

Dgen Teleios Omni Pro / Artrix H8: Fix on 1CBS type.

HP Latex 700 (W) / HP Latex 800 (W): Fix an XML parsing error when the printer does not have any alerts.

HP Latex 800 (W) / Canon imagePROGRAF PRO-2100: Fixed the AutoNest margins that caused the nest to exceed the media size.

Mimaki JV300: A new resolution (720x720-New-VD) was added to the 8-color driver, which fixes linearisation problems.

Mimaki TS100-1600: Correction of a margin error that generated blank lines when printing centered jobs.

Roland TrueVIS VG3: An inconsistency between the name of the qualities and the ink sets was corrected.

Aristo XML – More info

InnoHue Flatbed – More info

Aristo: An option to enable Bezier curves was added.

Generic DXF: Now the user can choose Dot, Square, or Cross as the type of cutting marks.
Additionally, the units of the output .DXF cut file are chosen according to the units of the interface (metric or imperial). 

Graphtec CE7000: Now the driver supports Panelling (only in the feed direction). 

i-Script drivers (I-Script, Generic Cut File, Kongsberg (JDF)):

• Change of top and bottom margins in all I-Script drivers, to avoid blank space if not needed.
• Also, the drivers can now also register marks in the Y direction (horizontal).
• Finally, a new field "Output naming" has been added so that you can choose between ID_name, name_ID, or only ID.

Roland CAMM-1 GR2 / Mutoh ValueCut II / GCC: Improvement of RawIP connection for big jobs.

Kongsberg JDF: Fixed the error of missing ProductID (media name) in the cutting file, when associating materials/methods.

Roland CAMM-1 GR2: Fix of shifted cut paths when not using panelling.

TotalColor qb / Barbieri LFP qb Textile: Following an update of the latest SDK (V5.09), now CalderaRIP has a specific driver for the textile version of these devices. 

TotalColor qb / Barbieri LFP qb: Update of the latest SDK (V5.09) of these devices, which improves the target recognition of the camera included. 

X-Rite i1 Pro 3: Improved the error message that appears when no lightness value (L*) is detected while creating a color profile. The previous can occur due to a reading error or poor device calibration.