This article explains how to choose the correct cutting driver in CalderaRIP for roll-to-roll or flatbed cutters, and trimmers, to ensure timely production.
Good to know
The cutters shown below are grouped by type for ease of reference and to highlight differences in installation. Tables reflect status as of November 2025. Consult the Supported Devices page for real-time updates.
Context
Historically, roll-to-roll cutters required a CutServer license, flatbeds required a GrandCut license (divided by price into A or B), and trimmers required a cut option.
Because each cutter type used a different license model, and due to how CalderaRIP has evolved over time, installation methods now differ by device type.
Since November 2025, annual subscribers and perpetual-license holders with CalderaCare may use any cutting devices supported by CalderaRIP without a separate license. For more information, partners and resellers should consult the Partners Portal; end users can find details on our website.
Roll-to-Roll Cutters Supported
You may be interested in reading:
- What is the VisualCut Module for Roll-to-Roll cutters?
- How to install a VisualCut (roll-to-roll) cutter?
| Manufacturer | Model |
First Version with Support |
License Type (Prior to 11/2025) | Details |
| GCC | RX | V9.10 | CutServer | Ethernet connection only since v14.1. |
| GCC | Bengal | V8.01 | CutServer | |
| GCC | Expert 24 | V8.01 | CutServer | |
| GCC | Expert 24 LX | V8.01 | CutServer | |
| GCC | Expert Pro | V8.01 | CutServer | |
| GCC | Puma III | V8.01 | CutServer | |
| GCC | Sable | V8.01 | CutServer | |
| GCC | Jaguar | V7.57 | CutServer | |
| GCC | Puma | V7.57 | CutServer | |
| Graphtec | CE8000 | v18.2.0 | CutServer | More info |
| Graphtec | FCX2000 | V14.00 | CutServer | |
| Graphtec | FC9000 | V13.10 | CutServer | More info |
| Graphtec | CE7000 | V13.10 | CutServer | More info |
| Graphtec | FC8600 | V9.20 | CutServer | |
| Graphtec | FC2250 | V11.1 | CutServer | |
| Graphtec | FC5100-100 | V7.0 | CutServer | |
| Graphtec | CE3000 | V7.00 | CutServer | |
| Graphtec | CE3000 Mk2 | V7.00 | CutServer | |
| Graphtec | FC7000 | V7.00 | CutServer | |
| Graphtec | FC7000 Mk2 | V7.22 | CutServer | |
| Graphtec | FC8000 | V7.55 | CutServer | |
| Graphtec | CE6000 | V9.2 | CutServer | |
| HP | Latex 64 Plus Cutter | V14.10 | CutServer | |
| HP | Latex 54 Plus Cutter | V14.10 | CutServer | |
| HP | Latex 54 Cutter | V11.10 | CutServer | |
| HP | Latex 64 Cutter | V11.10 | CutServer | |
| Mimaki | CG-AR Series | V16.00 | CutServer | Includes 3 models. More info |
| Mimaki | CG-FXII Plus Series | V14.00 | CutServer | Includes 3 models. More info |
| Mimaki | CF22 | V12.00 | CutServer | Includes 5 models. More info |
| Mimaki | TPC-1000 | CutServer | ||
| Mimaki | CFL-605RT | CutServer | ||
| Mimaki | CG-FXII Series | V9.20 | CutServer | Includes 3 models. More info |
| Mimaki | CG-FX Series | V9.20 | CutServer | Includes 3 models. More info |
| Mimaki | CG-SRIII Series | V9.20 | CutServer | Includes 3 models. More info |
| Mimaki | CG-60SR | V9.20 | CutServer | More info |
| Mutoh | ValueCut II | V9.20 | CutServer | Ethernet connection only since v14.1. |
| Mutoh | ValueCut | V9.20 | CutServer | |
| Mutoh | Kona | V8.00 | CutServer | Not supported since V12 due to connection incompatibilities (USB was not supported on macOS since V10) |
| Mutoh | Ultima SC | V7.00 | CutServer | Not supported since V12 due to connection incompatibilities (USB was not supported on macOS since V10) |
| Mutoh | SC-Pro | V7.55 | CutServer | Not supported since V12 due to connection incompatibilities (USB was not supported on macOS since V10) |
| Roland | CAMM-1 GR2 | V15.1.1 | CutServer | More info |
| Roland | CAMM-1 GR | V11.10 | CutServer | |
| Roland | GS | V10.20 | CutServer | Roland GS24 (version 10.2 build 160601 or later required). |
| Roland | CammJet CJ-540 | V7.00 | CutServer | |
| Roland | SolJet SP | V7.00 | CutServer | Roland SP driver for both immediate and VisualCut |
| Roland | VersaCAMM SP | V7.00 | CutServer | Roland SP driver for both immediate and VisualCut |
| Roland | GX | V7.22 | CutServer | Roland Cutters GX |
| Summa | S Class 3 OPOS Xtra (S3) | V17.00 | CutServer | More info |
| Summa | S Class 3 (S3) | V16.3.1 | CutServer | More info |
| Summa | S Class 2 (S2) | V9.20 | CutServer | Does NOT support OPOS-CAM directly, use File mode and the Windows/MacOS controller. Other modes supported directly. More info |
| Summa | SummaCut D FX | V11.2 | CutServer | Summa S2 PostNet. Summa S series (D and T). Winplot > .dmp. More info |
| Summa | S series D (S1) | V7.01 | CutServer | More info |
| Summa | S series T (S1) | V7.01 | CutServer | Does NOT support OPOS-CAM directly, use File mode and the Windows/MacOS controller. Other modes supported directly. More info |
| Summa | SummaCut D S | V7.01 | CutServer | |
| Summa | SummaSign | V7.01 | CutServer | |
| Volter | All models | V12.00 | CutServer | Supports .nc files |
Flatbed Cutters Supported
You may be interested in reading: How to install a GrandCut (flatbed) cutter?
Info
The GrandCut A category was introduced in CalderaRIP V16. However, this category did not apply to drivers used with older versions of CalderaRIP (15, 14 and earlier). If you needed a Summa F driver with CalderaRIP V16, for example, you could benefit from a GrandCut A licence. However, if you needed a Summa F driver with CalderaRIP V15 or an earlier version, you would have needed a standard GrandCut licence.
| Manufacturer | Model | First Version with Support |
License Type (Prior to 11/2025) |
Details |
| Agfa | Acorta | V11.00 | GrandCut B | Supports .xml files. More info |
| Aristo | XML | V16.3 | GrandCut B | Supports .xml files. More info |
| Aristo | Flatbed cutters | V7.11 | GrandCut B | Supports .plt files. More info |
| AXYZ | All models | V12.00 | GrandCut B | Supports .dxf files |
| BigPrinter | All models | V11.00 | GrandCut B | Supports .oxf files. More info |
| Blackman and White | All models | V11.00 | GrandCut A | TigerVision Controller. Supports .xml files. More info |
| Bullmer | All models | V15.00 | GrandCut B | Supports .oxf files. More info |
| Colex | Sharpcut | V10.20 | GrandCut B | Supports .plt files |
| Comagrav | All models | V10.10 | GrandCut B | Supports .cut files |
| Darrel | Darrel | V9.20 | GrandCut B | Supports .plt files |
| DGS | All models | V9.20 | GrandCut B | Supports .hgl files |
| Duncan | Flatbed cutters | V7.22 | GrandCut B | Supports .plt files |
| Dyss | X5 | V10.10 | GrandCut B | DXF |
| Dyss | X7 | V10.10 | GrandCut B | DXF |
| Dyss | X9 | V10.10 | GrandCut B | DXF |
| Elitron | All models | V10.00 | GrandCut A | Supports .xml files. More info |
| Esko Kongsberg | Flip Side Reader | V12.00 | GrandCut B | Supports .cgf files |
| Esko Kongsberg | i-cut Production Console | V11.00 | GrandCut B | i-script 2.0. Supports .cut and .zip (.cgf and .jdf) files |
| Esko Kongsberg | XPAuto | V10.20 | GrandCut B | Supports .dxf files |
| Esko Kongsberg | i-cut Vision | V7.0 | GrandCut B | i-script 1.0. Supports .cut files |
| EuroSystems | OptiSCOUT | V7.20 | GrandCut B | Supports .oxf files. More info |
| Generic | DXF (Enhanced) | V18.0 | GrandCut B | Supports .dxf files and methods and materials management. More info |
| Generic | DXF | V10.20 | GrandCut B | Supports .dxf files. More info |
| Generic | HPGL | V9.20 | GrandCut B | Supports .hpgl files |
| Gerber | V8.01 | GrandCut B | 7 marks support from 9.10 (recent controller software only) | |
| Grafitroniks | GTK | V7.20 | GrandCut B | Supports .svg files |
| Harmuth | All models | V9.20 | GrandCut B | DXF |
| Hasler | All models | V15.00 | GrandCut B | Supports .oxf files. More info |
| Hi Seiki | Flatbed cutter | V13.10 | GrandCut A | Supports .xml files. More info |
| iECHO | All models | V11.00 | GrandCut A | Supports .xml files. More info |
| Innohue | Flatbed cutters | V16.3 | GrandCut A | More info |
| Jingwei | All models | V10.00 | GrandCut A | Supports .xml files. More info |
| Kimla | CNC linear cutting plotters | V16.00 | GrandCut B | More info |
| Liyu | Q Cut | V17.3.0 | GrandCut A | More info |
| Matic | Helios Plus | V12 | GrandCut A | Supports .xml files. More info |
| Matic | Matic | V9.20 | GrandCut B | Supports .dxf files |
| MCT | TigerVision | V11.00 | GrandCut A | Supports .xml files. More info |
| Mecanumeric | Mecanumeric | GrandCut B | Supports .plt and .hpgl files | |
| MGE i-cut | i-script (level 5) | V7.10 | GrandCut B | Supports .cut files |
| Mimaki | CFX Series | V17.3.0 | GrandCut A | More info |
| Multicam (AUS) | Trident X000 Series | v15.1.0 | GrandCut B | Flatbeds using N-Code. Supports .nc files. More info |
| Multicam (US) | Flatbed cutters | V7.20 | GrandCut B | Two different drivers: Multicam (.plt and .hpgl files) and Multicam DXF (.dxf files) |
| Opticam | All models | V10.20 | GrandCut B | DXF |
| Protek | All models | V10.10 | GrandCut B | Supports .dxf files |
| Saga | ExpressCutPRO | V17.3.0 | GrandCut A | More info |
| Scodix | Scodix | V9.20 | GrandCut B | Supports .xml files. More info |
| Secabo | DTF MultiCut Pro | V17.3.0 | GrandCut A | More info |
| SinaJet | All models | V14.10 | GrandCut A | Supports .xml files. More info |
| Summa | L Series | V13.10 | GrandCut B | Two drivers : L1810 and L3214, requires version 19 of Aps-Ethos |
| Summa | GoProduce | V12.00 | GrandCut A | Supports .sgp files and Material-Methods synchronization |
| Summa | Dual Cutters | V11.20 | GrandCut B | Formerly "Summa Twin". Experimental driver for combining two cutters for the same job. More info |
| Summa | SummaFlex | V10.10 | GrandCut A | |
| Summa | F series | V9.00 | GrandCut A | When used with the GoProduce or SummaFlex software. More info |
| Summa | F series | V10.20 | GrandCut B | When used with the OptiScout controller. More info |
| Tekcel | Opticam | V9.20 | GrandCut B | Two different drivers: Opticam (.plt files) and Opticam DXF (.dxf files) |
| TPS | All models | V15.00 | GrandCut B | More info |
| Trotec | Laser cutters | V15.00 | GrandCut B | There is no specific driver for these cutters, the Generic DXF driver must be used. More info |
| Valiani | Geminus | V11.10 | GrandCut A | Crop Marks are not supported with non-vacuum cutters versions. Supports .xml files. More info |
| Valiani | Maximus | V11.10 | GrandCut A | Crop Marks are not supported with non-vacuum cutters versions. Supports .xml files. More info |
| Valiani | Optima | V11.10 | GrandCut A | Crop Marks are not supported with non-vacuum cutters versions. Supports .xml files. More info |
| Valiani | Ultra | V11.10 | GrandCut A | Crop Marks are not supported with non-vacuum cutters versions. Supports .xml files. More info |
| Verso | All models | V15.1.0 | GrandCut B | More info |
| VHF | All models | V10.20 | GrandCut B | Supports .cut files |
| Vivid | All models | V15.1.0 | GrandCut A | Supports .xml files. More info |
| Zund | Zund Cut Center (ZCC) 4 | V17.00 | GrandCut B | Supports .zcc files. More info |
| Zund | Zund Touch & Cut | V7.57 | GrandCut B | Supports .svg files |
| Zund | Zund & Caldera Senor | V7.10 | GrandCut B | Supports .cut files |
| Zund | Zund Cut Center (ZCC) | V8.0 | GrandCut B | Supports .zcc files |
Trimmers Supported
You may be interested in reading:
- What is the Trim-O-Matik feature?
- How to activate Trim-O-Matik? / How to configure Trim-O-Matik?
- When to use Trim-O-Matik with Nest-o-Matik or Step&Repeat?
| Manufacturer | Model |
First Version with Support |
License Type (Prior to 11/2025) | Details |
| Crest | Crest | V10.00 | Trim-O-Matik | More info |
| Flexa | Miura | V17.1.0 | Trim-O-Matik | More info |
| Fotoba | XLA 170 | V13.10 | Trim-O-Matik | More info |
| Fotoba | Digitrim | V5.00 | Trim-O-Matik | More info |
| Fotoba | XL | V5.00 | Trim-O-Matik | More info |
| Fotoba | WR | V5.00 | Trim-O-Matik | More info |
| Fotoba | XXL | V5.00 | Trim-O-Matik | More info |
| Fotoba | XLD | V5.00 | Trim-O-Matik | More info |
| Innohue | Trimmer | V13.10 | Trim-O-Matik | |
| Kala | KalaXY | V10.10 | Trim-O-Matik | More info |
| Meevo | Meevo | V11.00 | Trim-O-Matik | More info |
| Neolt | X DTF | V18.0 | Trim-O-Matik | More info |